Product Specifications

Audio Resolution

• Sampling frequencies:  44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Quantization bit depth:  24-bit

Analogue Inputs

• Mic inputs (balanced):  XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
  • Input impedance:  2.2 kΩ
  • Rated input level:  –7 dBu (0.346 Vrms)
  • Maximum input level:  +9 dBu (2.183 Vrms)
  • Gain range:  56 dB
• Instrument inputs (unbalanced, MIC/LINE INST switch set to INST):  6.3-mm standard TS stereo jacks (Tip: HOT, Sleeve: GND)
  • Input impedance:  ≥1 MΩ
  • Rated input level:  –6 dBV (0.501 Vrms)
• Maximum input level:  +10 dBV (3.162 Vrms)
  • Gain range:  56 dB
• Line inputs (balanced, MIC/LINE INST switch set to MIC/LINE):  6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND)
  • Input impedance:  10 kΩ
  • Rated input level:  +4 dBu (1.228 Vrms)
• Maximum input level:  +20 dBu (7.75 Vrms)
  • Gain range:  56 dB

Analogue Outputs

• Line outputs (balanced):  6.3-mm standard TRS stereo jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
  • Output impedance:  210 Ω
  • Rated output level:  +4 dBu (1.228 Vrms)
  • Maximum output level:  +20 dBu (7.746 Vrms)
• Headphone output (PHONES):  6.3-mm standard stereo jack
  • Maximum output power:  18 mW + 18 mW or higher (THD+N 0.1% or less, into 32 Ω load)

Control Inputs/Outputs

• MIDI IN connector:  5-pin DIN
  • Format:  MIDI standard
• MIDI OUT connector:  5-pin DIN
  • Format:  MIDI standard
• USB:  4-pin USB, Type C
  • Transfer rate:  USB 2.0 High Speed (480 MBit/s)

Audio Performance

• Mic amp EIN (equivalent input noise) :   ≤−128 dBu (150 Ω termination, GAIN knob at maximum)
• Frequency response, MIC/LINE input
  • 44.1 kHz / 48 kHz:  20 Hz – 20 kHz, +0 dB/−0.4 dB (JEITA)
  • 88.2 kHz / 96 kHz:  20 Hz – 40 kHz, +0 dB/−0.4 dB (JEITA)
• Frequency response, LINE output
  • 44.1 kHz / 48 kHz:  20 Hz – 20 kHz, +0.2 dB/−0.1 dB (JEITA)
  • 88.2 kHz / 96 kHz:  20 Hz – 40 kHz, +0.2 dB/−0.4 dB (JEITA)
• S/N ratio:  
  • 110 dB (MIC input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted)
  • 108 dB (LINE input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted)
  • 110 dB (LINE output, LINE OUT knob at maximum, 20-kHz SPCL LPF, A-weighted)
• Distortion (THD+N):  
  • 0.0013 % (MIC IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF)
  • 0.0011 % (LINE IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF)
  • 0.0012 % (LINE OUT, 1 kHz sine wave, −4 dBFS input, LINE OUT knob at maximum, 20 kHz SPCL LPF)
• Crosstalk attenuation:  ≥95 dB (MIC/LINE input to LINE output, 1 kHz sine wave, GAIN knob at minimum)

Computer System Requirements

• Windows
  • Computer hardware requirements:  Windows computer with a USB 2.0 port
  • CPU/processor speed:  2 GHz or faster dual core processor (x86)
  • Memory:  2 GB or more
• Supported audio drivers:  ASIO2.0, WDM, MIDI

• macOS 
  • CPU/processor speed:  2 GHz or faster dual core processor
  • Memory:  2 GB or more
  • Supported audio drivers:  Core Audio, Core MIDI
• iOS
  • Supported audio drivers:  Core Audio

^{Important: To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary.}

Power Supply and Other Specifications

• Power supply
  • When used with a computer:  USB bus power or dedicated AC adapter below
  • When used with an iOS device:  Dedicated AC adapter (Tascam PS-P520E, DC 5 V)
• Power consumption:  1.75 W
• External dimensions (W × H × D, including protrusions):  186 mm × 65 mm × 160 mm
• Weight:  1.1 kg
• Operating temperature range:  5–35 °C